DiabloSport Trinity T-1000 Comprehensive User Manual - Manual (Page 24)

DiabloSport Trinity Comprehensive User Manual Ver. 2.04 Page 24
Step 1: Press “Racing” From the main menu and select “0 to 60 MPH”.
Choose between the drag tree or motion start modes.
Step 2: Regardless of which option you chose in step 1, you will need to
bring your vehicle to a full stop. If you chose Motion Start the Trinity will
begin to calculate your 0‐60 time as soon as you press the gas after a full
stop. If you chose drag tree, the Trinity will start the countdown lights once
you’ve stopped the vehicle‐ hit the gas when the light turns green! The
Trinity will show you your reaction time.
6.2- Quarter & Eighth Mile Drag Race
Step 1: Press “Racing” from the main menu and select “1/4 Mile” or “1/8
mile”. Choose between the drag tree mode and motion start mode.
Step 2: The Trinity will start the count‐down once you’ve stopped the
vehicle‐ hit the gas when the light turns green! The Trinity will show you
your reaction time.
SECTION 7: Interfacing the Trinity
with a PC
VERY IMPORTANT BEFORE YOU PROCEED WITH ANY PC
RELATED FEATURES YOU MUST COMPLETE SECTION 7.1
The DiabloSport Trinity can interface with a PC in various ways. You can
download updates for the Trinity’s firmware from the internet, download
custom tunes from a CMR dealer, or upload your data log files for view
on the free DAT Viewer.
In order to use your Trinity with your PC there is some preparation you
will need to do on your PC to make sure everything runs smoothly.
Before you hook the Trinity up to the PC for any reason, make sure you
follow the steps detailed in this section.