Ag Leader GPS 5200 User Guide - Manual (Page 11)

GPS 5200 Receiver User Guide 9
Overview 2
RS-232
– NMEA-0183 output: GGA, GLL, GRS, GST, GSA, GSV, MSS,
RMC, VTG, ZDA, XTE (the default NMEA messages are
GGA, GSA, VTG, and RMC)
Note – PTNLDG, PTNLEV, PTNLGGK, PTNLID, and PTNLSM are Trimble
proprietary NMEA output messages.
– RTCM SC-104 output
– Trimble Standard Interface Protocol (TSIP) input and
output
Receiver connections
The following figure shows the connector ports and the LED indicator
on the GPS 5200 receiver:
The two connectors (Port A and Port B) can perform the following
functions:
• accept power
• accept TSIP, RTCM, ASCII, and (if enabled) CMR inputs
• output RTCM, TSIP, and NMEA messages
• output 1 PPS signals
LED indicator
Port A Port B
GPS5200_1A_UserGuide_ENG.book Page 9 Friday, December 19, 2008 12:57 PM