HP SAN - Manual (Page 52)

Saving the current configuration file
SAN Visibility enables you to save the SAN configuration data for future use.
To save the SAN configuration file, complete the following steps:
1. Select File > Save to save the SAN configuration.
2. Enter a file name in the File Name box.
3. Click Save to save the configuration for future reference.
By default, the SAN configuration file is saved at the following location: \profiles.
NOTE:
A [*] is displayed in the SAN Visibility GUI title bar if you did not save the SAN configuration data.
Once the configuration file is saved, the name of the file is displayed in the SAN Visibility GUI title
bar.
Opening an existing configuration file
SAN Visibility enables you to open an existing configuration file [.xml extension] that is created and
saved earlier by SAN Visibility.
To open an existing configuration file, complete the following steps:
1. Select File > Open.
2. Locate and select the previously saved configuration file you want to open.
NOTE:
Previously saved configuration files from SAN Visibility can be opened from SAN Visibility
5.1. All profiles are saved in”< INSTALL_DIR >\Hewlett-Packard\HP SANVisibility\profiles"
3. Click Open.
The existing configuration is opened. The customer and configuration details (including SAN,
component group, and switch details) are populated and shown in the SAN Visibility GUI window.
Exiting from SAN Visibility
To exit from SAN Visibility software, select File > Exit.
Using SAN Visibility 52