HP SAN - Manual (Page 30)

4. Browse and select the HBA-Host map file that you want to load, and click Open. Figure 12
displays the HBA-map details.
NOTE:
You can only load a .csv file or a Fnames.conf file.
Figure 12 HBA-Host map details window
.
You can also modify an imported host map file. Click Add Row to add content to the file and click
Delete Row to delete a row.
To save the modified file, click Save File. The host map file is saved as a .csv file.
Creating HBA-Host map files
To create a HBA-Host map file, complete the following steps:
1. Click Advanced Settings from the navigation area of the SAN Visibility GUI.
2. Click the Map HBA to Host tab.
3. Click Create File.
Using SAN Visibility 30