HP SAN - Manual (Page 20)

1. Select the switch you want to remove from the SAN explorer area.
2. Right-click and select Remove from the pop-up menu, as shown in Figure 6 .
The switch is removed from the component group.
Figure 6 Removing switch
.
Removing a component group
To remove a component group from the SAN, complete the following steps:
1. Select the component group name you want to remove from the SAN explorer area.
2. Right-click and select Remove from the pop-up menu, as shown in Figure 7 .
The component group is removed from the SAN.
CAUTION:
Removing a component group removes all the switches attached to that group.
Using SAN Visibility 20