HP SAN - Manual (Page 29)

Figure 11 Specifying Advanced Settings window
.
Specifying HBA-Host map details (optional)
HBA-Host map file contains HBA-Node WWN and host mapping details. If this map file is provided
in the raw report, then the processed report maps the HBA-Node WWNs to the host names, and the
same information is displayed in the processed report.
You can create a new HBA-Host map file or you can import an existing HBA-Host map file.
HBA-Host map file can be a .csv file (comma separated file) or it can be a Fnames.conf file. The
Fnames.conf
file is the HP StorageWorks Command View EVAPerf configuration file. SAN Visibility
5.1 enables you to parse and populate the corresponding mapping entries from the .csv file.
Importing HBA-Host map files
To import a HBA-Host map file, complete the following steps:
1. Click Advanced Settings from the navigation area of the SAN Visibility GUI. The Advanced
Settings window is displayed.
2. Click the Map HBA to Host tab.
3. Click Import File to select a HBA-Host map file.
HP StorageWorks SAN Visibility 5.1 User Guide 29