HP SAN - Manual (Page 33)

Specifying type of SAN components to be displayed in the processed report (optional)
HP StorageWorks SAN Visibility 5.1 provides an option to filter the type of SAN components you
want to view in your processed report.
NOTE:
You can not filter a switch from the processed report. A switch can not be filtered from the processed
report as it is an integral part of the fabric and is required for SAN Visibility data collection.
To specify the type of SAN components that you want to view in the processed report, complete the
following steps:
1. Click Advanced Settings from the navigation area of the SAN Visibility GUI.
2. Click the Filter SAN Components tab. Figure 14 displays the filter SAN components details.
Figure 14 Filter SAN components window
. 3. Select Yes if you want to receive storage device details in the processed report.
4. Select Yes if you want to receive host and HBA details in the processed report.
5. Select Yes if you want to receive virtual machine details in the processed report.
If you select No, the processed report will not contain any descriptive details for the selected SAN
component.
HP StorageWorks SAN Visibility 5.1 User Guide 33