HP DreamScreen 130 Wireless Connected Screen - Manual (Page 9)

HP DreamScreen User Guide 3
Wall mounting
To prepare the HP DreamScreen for wall mounting,
unscrew the stand.
Holes for wall mounting are provided on the rear of
the HP DreamScreen.
The distance between the mounting holes (A) is
78.7 mm (3.098 in).
The mounting hole diameter is 8.5 mm (0.33 in).
The width of the notch (B) at the top of each mounting hole is 5.1 mm (0.20 in).
Recommended screw size:
Standard: #8 pan - head wood screws, or pan - head tapping screws used with
drywall anchors. Minimum screw length 25 mm (1 in).
Metric: M4 pan
- head wood screws, or pan - head tapping screws used with drywall
anchors. Minimum screw length 25 mm (1 in).
NOTES:
The HP DreamScreen can only be wall-mounted horizontally.
HP does not supply wall mounting screws for the HP DreamScreen.