HP Photosmart 3110 All-in-One Printer - Manual (Page 66)

5. Push the main tray back into the HP All-in-One.
Load other types of paper
The following table provides guidelines for loading certain types of paper. For best
results, adjust the paper settings each time you change paper sizes or paper types.
For information on changing paper settings for printing from a software application, or
for information about the following papers, see the onscreen
HP Image Zone Help .
Note Not all paper sizes and paper types are available with all the functions
on the HP All-in-One. Some paper sizes and paper types can only be used if
you are starting a print job from the
Print dialog box in a software application,
or if you are making a copy. They are not available for faxing or printing photos
from a memory card, digital camera, or storage device. Papers that are only
available for printing from a software application are indicated as such.
Paper Tips
HP papers HP Advanced Photo Paper or HP Photo Paper
Locate the arrow on the nonprinting side of the paper, and then slide
the paper into the main tray with the arrow side facing up. A sensor in
the HP All-in-One automatically optimizes the print speed and quality.
HP Premium Inkjet Transparency Film
Insert the film so that the white transparency strip (with arrows and the
HP logo) is on top and is going into the main tray first. For best results,
set the paper type to
Transparency before printing or copying.
Note The HP All-in-One might not automatically detect transparency
film if it is loaded incorrectly, or if you use transparency film other than
HP transparency film.
HP Iron-On Transfers
Flatten the transfer sheet completely before using it; do not load curled
sheets. Locate the blue stripe on the nonprinting side of the transfer
paper and then manually feed one sheet at a time into the main tray
with the blue stripe facing up.
User Guide 63
Load
originals
and
load
paper