Device update (mac) – HP Photosmart 3110 All-in-One Printer User Manual
Page 136
To use device update
1.
Do one of the following:
–
Double-click the update .exe file you downloaded from
–
When prompted, accept the device update found by the
Software Update
utility.
The
Device Update Wizard
opens on your computer.
2.
At the
Welcome
screen, click
Next
.
The
Select a Device
screen appears.
3.
Select your HP All-in-One from the list, and then click
Next
.
The
Important Information
screen appears.
4.
Make sure your computer and device meet the requirements listed.
5.
If you meet the requirements, click
Update
.
The
Updating Device
screen appears. A light begins to flash on the control panel
of your HP All-in-One.
The screen on your color graphics display turns green as the update is loaded
and extracted to your device.
6.
Do not disconnect, shut down, or perform any other activities on your device
while the update is occurring.
Note
If you disrupt the update, or an error message indicates the update
failed, call HP support for assistance.
After your HP All-in-One shuts down and restarts, an update complete screen
appears on your computer.
Your device is updated. It is now safe to use your HP All-in-One.
Device update (Mac)
The device update installer provides a means to apply updates to your HP All-in-One
as follows:
1.
Use your Web browser to download an update for your HP All-in-One from
.
2.
Double-click the downloaded file.
The installer opens on your computer.
3.
Follow the onscreen prompts to install the update to your HP All-in-One.
4.
Restart the HP All-in-One to complete the process.
User Guide
133
Troubleshooting