HP Photosmart 3110 All-in-One Printer - Manual (Page 62)

Load full-size paper
You can load many types of letter, A4, or legal paper, including A4 and 8.5 x 11 inch
photo paper, into the main tray of your HP All-in-One.
To load full-size paper
1.
Pull out the main tray, and slide the paper-width and paper-length guides to their
outermost positions.
2. Tap a stack of paper on a flat surface to align the edges, and then check the
paper for the following:
–
Make sure it is free of rips, dust, wrinkles, and curled or bent edges.
– Make sure all the paper in the stack is the same size and type.
3. Insert the stack of paper into the main tray with the short edge forward and the
print side down. Slide the stack of paper forward until it stops.
Tip If you are using letterhead, insert the top of the page first with the
print side down. For more help on loading full-size paper and letterhead,
refer to the diagram engraved in the base of the main tray.
4. Slide the paper-width and paper-length guides inward until they stop at the edges
of the paper.
Do not overload the main tray; make sure the stack of paper fits within the main
tray and is no higher than the top of the paper-width guide.
User Guide 59
Load
originals
and
load
paper