HP ProLiant Support Pack User Manual
Page 80
Scripted deployment 80
Parameter
Description
Possible values
ANONYMOUS-ACCESS
This parameter determines whether an
anonymous user can access the HP Systems
Management Homepage. (Applies to Linux PSP
only.)
YES, NO (default)
IP-BINDING
This parameter is used by the HP Systems
Management Homepage to determine whether
hpsmh can use all available NICs and detect
subnets for its web services. (Applies to Linux
PSP only.)
YES, NO (default)
IP-BINDING-LIST
This parameter is used by the HP Systems
Management Homepage to restrict the NICs and
subnets to use for its web servers.
The IP-BINDING parameter must be set to yes
for this parameter to be used during installation.
(Applies to Linux PSP only.)
IP address/NetMask
pairs separated by
semicolons (for example,
10.1.1.1/255.255.255.
0;10.2.2.2/255.255.25
5.0)
IP-RESTRICTED-LOGINS This parameter is used by the HP Systems
Management Homepage to restrict login access.
(Applies to Linux PSP only.)
YES, NO (default)
To enable restrictions on
who can log in to the
web server, this
parameter must be set to
yes, and values must be
provided to the IP-
RESTRICTED-EXCLUDE or
IP-RESTRICTED-INCLUDE
parameters.
IP-RESTRICTED-
EXCLUDE
This parameter is used by the HP Systems
Management Homepage to exclude specific IP
address/NetMask pairs from logging into the
web services. (Applies to Linux PSP only.)
This parameter is ignored unless the IP-
RESTRICTED-LOGINS parameter is set to yes.
List of IP address ranges
separated by semicolons
(for example, 10.1.1.1-
10.1.1.10;10.2.2.2-
10.2.2.10)
IP-RESTRICTED-
INCLUDE
This parameter is used by the HP Systems
Management Homepage to enable login only
from the IP address/NetMask pairs specified.
(Applies to Linux PSP only.)
This parameter is ignored unless the IP-
RESTRICTED-LOGINS parameter is set to yes.
List of IP address ranges
separated by semicolons
(for example, 10.1.1.1-
10.1.1.10;10.2.2.2-
10.2.2.10)
LOCALACCESS-ENABLED
This parameter is used by the HP Systems
Management Homepage to determine whether
to enable local anonymous access to the web
services. (Applies to Linux PSP only.)
•
YES (default to
include anonymous
access)
•
NO
LOCALACCESS-TYPE
This parameter is used by the HP Systems
Management Homepage to determine the type
of access granted to local users. (Applies to
Linux PSP only.)
•
Anonymous (default)
•
Administrator
CAUTION: Selecting local
access with administrator
privileges as the login
provides full access to
any user with access to
the local console, without
prompting for a user