beautypg.com

Minimum requirements for linux x86 servers – HP ProLiant Support Pack User Manual

Page 8

background image

Introduction 8

The beginning and ending IP addresses entered for the range of hosts (targets) must be on the same

subnet.

To install firmware on HP Integrity BL860c/BL870c/BL890c i2 Servers, you must run HP SUM from

an x86 or x86 Linux machine. You cannot deploy firmware on a Windows Integrity system from a
Windows Integrity system.

NOTE:

HP Smart Update Manager requires a true Administrator login and not an elevated

RUN AS Administrator. If you are unable to perform the net use * \\server\ADMIN$ for

Microsoft Windows® target servers, you do not have sufficient privileges to run HP Smart
Update Manager.

NOTE:

When attempting to use the remote deployment functionality of HP SUM on any

edition of Windows Server® 2008 or Windows Vista®, you must ensure that the File and
Print Services feature is enabled and that the File and Print Services exception has been

enabled in the Windows® firewall. Failure to do so prevents HP SUM from deploying remote
Windows® target servers.

For more information about PSP, see the HP ProLiant Support Pack for Windows and Linux User Guide on
the HP website
(

http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManu

al&lang=en&cc=us&docIndexId=64179&taskId=101&prodTypeId=18964&prodSeriesId=345557

).

For more information about ISP implementation by operating system, see the HP Window-on-Integrity
website (

http://www.hp.com/go/windows-on-integrity-docs

), or by server model number, see the HP

Integrity Server site (

http://www.hp.com/go/integrity_servers-docs

).

For more information on HP Smart Update Firmware - HP Integrity BL860c/BL870c/BL890c i2 Servers

Bundles, see the HP Integrity and HP 9000 firmware update options on the HP web site
(

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c003

99523&jumpid=reg_R1002_USEN

).

Minimum requirements for Linux x86 servers

To successfully deploy HP SUM on ProLiant target systems based on a Linux operating system, the

following must be available: (HP SUM does not support Linux on HP Integrity systems.)

A local administrative system with 512 MB of memory

glibc 2.2.4-26 or later

gawk 3.1.0-3 or later

sed 3.02-10 or later

pciutils-2.1.8-25.i386.rpm or later

To successfully deploy HP SUM on remote target systems based on a Linux operating system, the

following must be available:

tcl-8.x package

expect-5.x package

Starting with Linux PSP 8.40 and later, ensure the following platform-specific compatibility libraries are

also installed.

For Red Hat Enterprise Linux 4x86 servers:

This manual is related to the following products: