HP ProLiant Support Pack - Manual (Page 77)

Scripted deployment 77
Parameter Description Possible values
for installation.
These components are optional by default and
are not installed unless this parameter is used.
When the /usewmi parameter is used, and the
/usesnmp parameter is not used, the SNMP
components are optional.
ROMONLY This parameter is a filter switch and allows the
user to view only the firmware components
required for installation.
Do not use the /romonly parameter with the
/softwareonly parameter.
YES, NO
SOFTWAREONLY This parameter is a filter switch and allows the
user to view only the software components
required for installation.
Do not use the /softwareonly parameter with
the /romonly parameter.
YES, NO
USECURRENTCREDENTIAL This parameter enables the credentials of the
local host to be used as the credentials to access
the targets instead of providing the username
and password explicitly for each target.
The assumption is that the current credentials are
valid for the targets being accessed. (Applies to
Windows® operating systems only.)
YES, NO
WEBUPDATENEEDED This parameter enables you to instruct HP SUM
to include the components from ftp.hp.com in the
list of possible updates. (This parameter does not
apply to ISP.)
YES, NO
USEPROXYSERVER This parameter enables the inclusion of a proxy
server (and port number) to access ftp.hp.com.
(This parameter does not apply to ISP.)
String value
For example,
11.22.33.44:80
USEPROXYSCRIPT This parameter enables the inclusion of a proxy
script to access ftp.hp.com. (This parameter does
not apply to ISP.)
Web URL (for example,
autoproxy.com)
DELETEINPUTFILE This parameter enables you to instruct HP SUM
to delete the input file after it has been read in.
YES, NO (default)
ONFAILEDDEPENDENCY This parameter instructs HP SUM how to proceed
when a component has a failed dependency.
The default of OmitHost causes the host to be put
in a failure state and no install is attempted on it.
OmitComponent deselects the affected
components and proceeds with any updates that
do not have dependency failures. Force attempts
all updates, even if they have dependency
failures.
OmitHost (default),
OmitComponent, Force
HOST This parameter is the IP address or the DNS
name of a remote server, remote iLO NIC port,
Virtual Connect Ethernet or Fibre Channel
Module for c-Class BladeSystem, or BladeSystem
Onboard Administrator.
When two Onboard Administrators are in an
IP address, DNS name