HP ProLiant Support Pack - Manual (Page 79)

Scripted deployment 79
Parameter Description Possible values
Linux PSP only.)
CMATRAPDESTINATIONIP
ORDNS
This parameter enables you to specify the IP
address or DNS host name of a server as a
destination for SNMP traps, such as Systems
Insight Manager. (Applies to Linux PSP only.)
IP address, DNS name
CMASYSCONTACT This parameter enables you to specify a person
or phone number for administration of this
system. (Applies to Linux PSP only.)
String value
CMASYSLOCATION This parameter enables you to designate the
location of this system. (Applies to Linux PSP
only.)
String value
CMASTARTWEBAGENT This parameter determines whether the HP
Insight Systems Manager Web Agent is started
when the health application loads. (Applies to
Linux PSP only.)
• YES (start the web
agent)
• NO (do not start the
web agent)
CMASTARTSTORAGEAGENT This parameter determines whether the HP
Insight Systems Manager Storage Agent is
started when the health application loads.
(Applies to Linux PSP only.)
• YES (start the storage
agent)
• NO (do not start the
storage agent)
CMANOTAINTEDKERNEL This parameter determines whether the HP Lights-
Out management driver is started when the
health application loads. (Applies to Linux PSP
only.)
• YES (start the HP
Lights-Out
management driver)
• NO (do not start the
HP Lights-Out
management driver)
HPVCAVCRMSERVER This parameter informs the VCA of the name of
the VCRM to use as a software distribution
repository. (Applies to Linux PSP only.)
VCRM name
HPVCAVCRMLOGINID This parameter is the login ID that the VCA uses
to communicate with the VCRM. (Applies to
Linux PSP only.)
VCA login ID
HPVCAVCRMLOGINPASSWD This parameter is the password for the login ID
specified in the HPVCAVCRMLOGIN parameter.
(Applies to Linux PSP only.)
VCA login password
ADMIN-GROUP This parameter is used by the HP Systems
Management Homepage (hpsmh) to set up
security for the web server. (Applies to Linux PSP
only.)
Up to five Linux groups,
separated by spaces or
semicolons, to enable
administrative access to
the web server.
USER-GROUP This parameter is used by the HP Systems
Management Homepage to set up security for
the web server. (Applies to Linux PSP only.)
Up to five Linux groups,
separated by spaces or
semicolons, to enable
user-level access to the
web servers.
OPERATOR-GROUP This parameter is used by the HP Systems
Management Homepage to set up security for
the web server. (Applies to Linux PSP only.)
Up to five Linux groups,
separated by spaces or
semicolons, to enable
operator-level access to
the web servers.