HP ProLiant Support Pack User Manual
Page 59
HP SUM User Interface 59
Icon
Text
Description
Host Skipped Due to
Existing HPSUM
Session
The host is skipped due to an existing HP Smart Update Manager
session.
Action Required
The host is not ready for installation. Click View Host for additional
information.
Discovery Failed
The host is not ready for installation. The detection of installed hardware,
software, and firmware has failed.
NOTE:
The default reboot behavior after updates are installed might also appear in the Status
column.
To zoom in to single host selections, click View Host on the Select Items to be Installed screen. The
Selections for Single Host screen appears.
To set single-host selections, proceed as described in "Selecting Components to Install (on page
)."
After setting the single-host selections for all hosts to be updated, on the Select Items to be Installed screen,
to proceed with the installation, click Install.
Updating Firmware on HP Integrity BL860c/BL870c/BL890c i2
Servers
One firmware package for the HP Integrity BL860c/BL870c/BL890c i2 Servers includes System Firmware
which requires a reboot to activate the firmware. To specify this, the user can select the Configure Now
link to select one of the following options:
•
Upload and Activate—(Default selection). If you select this option, after the component is uploaded to
the server which is up and running, HP SUM shuts down and restarts the server to activate the system
firmware immediately.