HP Color LaserJet CM4730 Multifunction Printer series User Manual
Page 49
Menu item
Sub-menu item
Sub-menu item
Values and Description
Primary DNS
Specify the IP address (n.n.n.n) of a Primary DNS
Server.
Secondary DNS
Specify the IP address (n.n.n.n) of a Secondary
Domain Name System (DNS) Server.
IPV6 Settings
Enable
Use this item to enable or disable IPv6 operation on the
print server.
Off
(default): IPv6 is disabled.
On
: IPv6 is enabled.
Address
Manual Settings: Use this item to manually set IPv6
addresses on the print server.
Enable
: Select this item and choose
On
to enable
manual configuration, or
Off
to disable manual
configuration.
Address
: Use this item to type a 32 hexadecimal digit
IPv6 node address that uses the colon hexadecimal
syntax.
DHCPV6 Policy
Router Specified
: The stateful auto-configuration
method to be used by the print server is determined by
a router. The router specifies whether the print server
obtains its address, its configuration information, or
both from a DHCPv6 server.
Router Unavailable
: If a router is not available, the print
server should attempt to obtain its stateful
configuration from a DHCPv6 server.
Always
: Whether or not a router is available, the print
server always attempts to obtain its stateful
configuration from a DHCPv6 server.
Primary DNS
Use this item to specify an IPv6 address for a primary
DNS server that the print server should use.
Secondary DNS
Use this item to specify an IPv6 address for a
secondary DNS server that the print server should use.
Proxy Server
Specifies the proxy server to be used by embedded
applications in the device. A proxy server is typically
used by network clients for Internet access. It caches
Web pages, and provides a degree of Internet security,
for those clients.
To specify a proxy server, enter its IPv4 address or
fully-qualified domain name. The name can be up to
255 octets.
For some networks, you may need to contact your
Independent Service Provider (ISP) for the proxy
server address.
Proxy Port
Type the port number used by the proxy server for
client support. The port number identifies the port
reserved for proxy activity on your network, and can be
a value from 0 to 65535.
Table 2-11
Jetdirect menus (continued)
ENWW
Initial Setup menu
33