HP Color LaserJet CM4730 Multifunction Printer series - Manual (Page 39)

Default Fax Options
Administration > Default Job Options > Default Fax Options
Table 2-5 Fax Send menu
Menu item Sub-menu item Values Description
Resolution Standard (100x200dpi)
(default)
Fine (200x200dpi)
Superfine (300x300dpi)
Set the resolution for sent documents. Higher
resolution images have more dots per inch (dpi), so
they show more detail. Lower resolution images have
fewer dots per inch and show less detail, but the file
size is smaller.
Fax Header Prepend (default)
(default)
Overlay
Select the position of the fax header on the page.
Select Prepend to print the fax header above the fax
content and move the fax content down on the page.
Select
Overlay to print the fax header over the top of
the fax contents without moving the contents down.
Using this option could prevent a single-page fax from
flowing onto another page.
Table 2-6 Fax Receive menu
Menu item Values Description
Forward Fax Fax Forwarding
Change PIN
To forward received faxes to another fax device, select Fax
Forwarding and Custom . Then type the number of the other fax
device into the Fax Forwarding Number field. When you select this
menu item for the first time, you are prompted to set up a PIN. Type
that PIN every time you use this menu. This is the same PIN that is
used to access the Fax Printing menu.
Stamp Received Faxes Enabled
Disabled (default)
Add the date, time, senders phone number, and page number to each
page of the faxes that this device receives.
Fit to Page Enabled (default)
Disabled
Shrink faxes that are larger than Letter-size or A4-size so that they
can fit onto a Letter-size or A4-size page. If it this feature set to
Disabled , faxes larger than Letter or A4 will flow across multiple
pages.
Fax Paper Tray Select from the list of trays. Select the tray that holds the size and type of paper that you want to
use for incoming faxes.
Output Bin Select the default output bin, if applicable, to use for faxes.
ENWW Default Job Options menu 23