HP Color LaserJet CM4730 Multifunction Printer series - Manual (Page 168)

increases the edge sharpness. Trapping reduces the effect of incorrect color alignment by slightly
overlapping the edges of adjacent objects. The color REt option smooths the edges.
NOTE If you notice white gaps between objects, or if you notice areas that have a slight shadow
of cyan, magenta, or yellow at the edge, choose an edge-control setting that increases the
trapping level.
Four levels of edge control are available:
● Maximum is the most aggressive trapping setting. Adaptive halftoning and color REt settings are
on.
● Normal is the default trapping setting. Trapping is at a medium level. Adaptive halftoning and color
REt settings are on.
● Light sets trapping at a minimal level. Adaptive halftoning and color REt settings are on.
● Off turns off trapping, adaptive halftoning, and color REt.
152 Chapter 10 Using color ENWW