HP Color LaserJet CM4730 Multifunction Printer series - Manual (Page 139)

1 2 3 4
1. Long-edge landscape Every other printed image is oriented upside-down. Facing pages are read
continuously from top to bottom.
2. Short-edge landscape Every printed image is oriented right-side-up. Facing pages are read from top to
bottom.
3. Long-edge portrait This is the default setting, and the most common layout used. Every printed image
is oriented right-side-up. Facing pages are read from top to bottom.
4. Short-edge portrait Every other printed image is oriented upside-down. Facing pages are read
continuously from top to bottom.
Create booklets
You can copy two pages on one sheet of paper so you can fold the pages in the center to form a booklet.
The device arranges the pages in the correct order. For example, if the original document has eight
pages, the device prints pages 1 and 8 on the same sheet.
1. On the File menu in the software program, click Print.
2. Select the driver, and then click Properties or Preferences.
3. Click the Finishing tab.
4. Select Print On Both Sides.
5. In the drop-down box for Booklet Layout, select either Left Edge Binding or Right Edge
Binding. The Pages per Sheet setting automatically changes to 2 pages per sheet.
6. Click OK.
Set the stapling options
Select the stapler in the printer driver
1. Click Start, point to Settings, and then click Printers (for Windows 2000) or Printers and
Faxes (for Windows XP and Vista).
2. Right-click the HP product icon, and then click Properties or Printer Preferences.
ENWW Windows printer-driver features 123