HP StorageWorks XP Remote Web Console Software - Manual (Page 91)

Table 52 Parameters for the ICKDSF Command (Version 2/Volume Copying) (continued)
Description Value Parameter Command
Establishes the relationship
which covers the entire NOCOPY
volume. The background
copying process will not be
performed.
The relationship is
established even when the
S-VOL is online. YES ONLINTGT or ONTGT FLASHCPY ESTABLISH
The relationship is not
established when the copy
target is online. NO
The default setting of this
parameter is NO.
If the S-VOL or the T-VOL of
the relationship established N/A RESTORE
by specifying YES for
CHANGERECORDING is
updated, only the updated
part will be copied. And if
you specify YES for
CHANGERECORDING and
you reverse the S-VOL or the
T-VOL, Reverse Restore will
be executed and only the
updated part will be copied
in this case, too.
The relationship will be
maintained after the copying
operation is completed if
you specify YES for
INCREMENTAL. If you
specify NO or nothing for
INCREMENTAL, the
relationship will be
withdrawn after the copying
operation is completed.
Specify the S-VOL and the
T-VOL of the relationship into
reverse. N/A FASTREVERSERESTORE or
FASTREVREST
• If you specify YES for
CHANGERECORDING,
only the updated part of
the S-VOL or the T-VOL of
the established
relationship will be
copied.
•
If you specify NO for
CHANGERECORDING
or specify nothing, only
the copied part from the
S-VOL to the T-VOL of the
established relationship
will be copied.
•
If you specify YES for
CHANGERECORDING,
the relationship will be
maintained after the
copying operation is
Establishing Version 2 Relationships 91