HP Color LaserJet CP3520 Printer Series - Manual (Page 53)

Item Sub-item Sub-item Values Description
100TX AUTO: Limits auto-negotiation to a
maximum link speed of 100 Mbps.
1000TX FULL: 1000 Mbps, full-duplex
operation.
Resets menu
The RESETS menu allows you to reset factory settings, disable and enable sleep mode, and update
the product after new supplies are installed.
To display: Press the Menu button , select the CONFIGURE DEVICE menu, and then select the
RESETS menu.
NOTE: Values that have an asterisk (*) are the factory-default values. Some menu items have no
default.
Item Sub-item Values Description
RESTORE FACTORY
SETTINGS Allows you to clear the page
buffer, remove all perishable
personality data, reset the
printing environment, and return
all default settings to factory
defaults.
CALIBRATION RESET Resets calibration values on the
formatter.
RESET SUPPLIES NEW FUSER KIT NO*
YES
Allows you to reset the fuser
maintenance count after
installing a new fuser.
SLEEP MODE OFF
ON*
If SLEEP MODE is OFF, the
product will never enter power
save mode and no asterisk will
appear next to any item when
the user enters the menu item
SLEEP DELAY.
Table 2-1 Embedded Jetdirect and EIO Jetdirect menus (continued)
ENWW Configure device menu 41