HP Color LaserJet CP3520 Printer Series User Manual
Page 190
Control panel message
Description
Recommended action
To exit press
No job to cancel
You have pressed the stop button
but the
product is not actively processing any jobs.
No action is necessary.
No stored jobs
Displayed when the user enters the
RETRIEVE JOB menu and there are no jobs
to retrieve.
No action is necessary.
NON HP SUPPLY IN USE
A non-HP supply is in use.
A user authorized the use of non-HP supplies
when the HP supply was replaced. Any
product repair required as a result of using
non-HP or unauthorized supplies is not
covered under warranty. HP cannot ensure
the accuracy or the availability of certain
features.
NON HP SUPPLY INSTALLED
The product is using a non-HP supply.
If you believe you purchased a genuine HP
supply, go to
. Any product repair required
as a result of using non-HP or unauthorized
supplies is not covered under warranty. HP
cannot ensure the accuracy or the availability
of certain features.
ORDER
The identified print cartridge is nearing the
end of its estimated useful life.
Printing will continue until a supply needs to
be replaced.
Order a replacement print cartridge.
ORDER
LESS THAN XXXX PAGES
The identified cartridge is nearing the end of
its estimated useful life. Estimated pages
remaining is based upon the historical page
coverage of this product.
Order a replacement cartridge.
ORDER FUSER KIT
LESS THAN XXXX PAGES
The fuser is near end of life. The product is
ready and will continue for the estimated
number of pages indicated. Printing will
continue until a supply needs to be replaced.
Order a replacement fuser kit.
ORDER SUPPLIES
More than one supply is nearing the end of its
estimated useful life.
Order the necessary supplies.
ORDER TONER COLLECTION UNIT
The toner collection unit is nearly full.
Order a replacement toner collection unit
now. Printing can continue.
Paused
To return to Ready press
The product is paused, and there are no error
messages pending at the display. The I/O
continues receiving data until memory is full.
Press the stop button
.
Performing upgrade
Do not power off
The product is in the process of upgrading the
firmware.
Please wait until the upgrade is complete.
Performing... COLOR BAND TEST
The color-band test is being performed.
No action is necessary.
Performing... PAPER PATH TEST
The product is performing a paper path test.
No action is necessary.
Please wait
The product is in the process of clearing data. No action is necessary.
Powering off...
The product is shutting down.
Please wait until the product shuts down.
Table 11-1
Control-panel messages (continued)
178 Chapter 11 Solve problems
ENWW