HP Color LaserJet CP3520 Printer Series - Manual (Page 163)

7. Holding the DIMM by the edges, align the notch on the DIMM with the bar in the DIMM slot at an
angle and firmly press the DIMM into the slot until it is fully seated. When installed correctly, the
metal contacts are not visible.
XO XO XO XO XO XO
XOXOXOXOXOXO
XO XOX OX OXO
XOXO XO XO XO
XOX OXOX OX O
XOXO XOX OXO
XOXOXOXOXOXO
XOXO XO XO XO
XOXOXO
XOXOXO
XOXOXO
XOXOXO
XOXOXO XOXOXO XOXOXO XOXOXO XOXOXO
XO XO XO
XO XO XO
XOXOXOXO XO XO XO
XO XO XO
XOXOXO
8. Push down on the DIMM until both latches engage the DIMM.
XO XO XO XO XO XO
XOXOXOXOXOXO XOXOXOXOXOXO
XOXO XO XOX O
XOXOXO
XOXOXO
XOXOXO XOXOXO
XOXOXO XOXOXO XOXOXO XOXOXO XOXOXO
XO XO XO
XO X O XO
XOXOXOXO XO XOX O
XO XO XO
XOXOXO
XIO XI OX IXO
O XIXO
XIO XIO
XIO XI OX IXO
O XIXO
XIO XIO
XIO XIO XIXO
O XIXO
XIO XIO
XI OX IO XIXO
OX IXO
XIO XIO
NOTE: If you have difficulty inserting the DIMM, make sure the notch on the bottom of the DIMM
is aligned with the bar in the slot. If the DIMM still does not go in, make sure you are using the
correct type of DIMM.
9. Align the formatter board in the tracks at the bottom of the slot, and then slide the board back into
the product.
NOTE: To prevent damage to the formatter board, ensure the formatter board is aligned in the
tracks at the top and the bottom of the opening.
ENWW Replace supplies 151