HP Color LaserJet CP3520 Printer Series - Manual (Page 154)

Replace supplies
You can configure the product to stop when the supply level reaches its estimated end of life. However,
the supply might still be able to produce acceptable print quality. To continue printing, either replace the
supply or reconfigure the printer by using the REPLACE SUPPLIES menu on the control panel. For
more information about ordering supplies, see
Supplies and accessories on page 219 . For more
information about the REPLACE SUPPLIES menu, see System setup menu on page 27 .
Supplies life
For information regarding specific product yield, see www.hp.com/go/learnaboutsupplies .
To order supplies, see Supplies and accessories on page 219 .
Locate supplies
Supplies are identified by their labeling and their blue plastic handles.
The following figure illustrates the location of each supply item.
Figure 10-2 Supply item locations
2
3
1
1 Toner collection unit
2 Print cartridges
3 Fuser
Supply replacement guidelines
To facilitate the replacement of supplies, keep the following guidelines in mind when setting up the
product.
● Allow sufficient space in the front and on the right side of the product for removing supplies.
● The product should be located on a flat, sturdy surface.
For instructions on installing supplies, see the label on each supply item or see www.hp.com/go/
learnaboutsupplies .
142 Chapter 10 Manage and maintain the product ENWW