HP Color LaserJet CP3520 Printer Series - Manual (Page 33)

Configure device menu
The CONFIGURE DEVICE menu allows you to change the default printing settings, adjust the print
quality, change the system configuration and I/O options, and reset the default settings.
Printing menu
These settings affect only jobs without identified properties. Most jobs identify all of the properties and
override the values set from this menu.
To display: Press the Menu button , select the CONFIGURE DEVICE menu, and then select the
PRINTING menu.
NOTE: Values that have an asterisk (*) are the factory-default values. Some menu items have no
default.
Menu item Values Description
COPIES Range: 1 - 32000 Allows you to set the default number of
copies for print jobs. The default number is
1.
DEFAULT PAPER SIZE A list of available sizes appears. Allows you to set the default paper size.
DEFAULT CUSTOM PAPER SIZE ● UNIT OF MEASURE
● X DIMENSION
● Y DIMENSION
Allows you to set the default size for any
custom print job. The default unit of
measure is MILLIMETERS.
DUPLEX OFF*
ON
Allows you to enable or disable two-sided
printing.
NOTE: This menu is available only on the
HP Color LaserJet CP3525dn printer and
the HP Color LaserJet CP3525x printer
DUPLEX BINDING LONG EDGE*
SHORT EDGE
Allows you to change the binding edge for
two-sided printing.
NOTE: This menu is available only on the
HP Color LaserJet CP3525dn printer and
the HP Color LaserJet CP3525x printer
OVERRIDE A4/LETTER NO
YES*
Allows you to set the product to print an A4
job on letter-size paper when no A4 paper
is loaded.
MANUAL FEED OFF*
ON
Setting this option to ON makes MANUAL
FEED the default for jobs that do not select
a tray.
COURIER FONT REGULAR*
DARK
Allows you to select a version of the Courier
font.
The DARK setting is an internal Courier
font available on HP LaserJet Series III
printers and older.
WIDE A4 NO *
YES
Allows you to change the printable area of
A4 paper. If you select NO, the printable
area is seventy-eight 10-pitch characters
on a single line. If you select YES, the
ENWW Configure device menu 21