HP Color LaserJet CP3520 Printer Series - Manual (Page 43)

Item Sub-item Values Description
PERSONALITY AUTO*
PCL
PDF
PS
Sets the default personality to
automatic switching, PCL, PDF, or
PS modes.
CLEARABLE WARNINGS JOB*
ON
Sets whether a warning is cleared
on the control panel or when
another job is sent.
AUTO CONTINUE OFF
ON*
Determines product behavior
when the system generates an
Auto Continuable error.
REPLACE SUPPLIES Sets the product behavior for when
a supply item is low.
The product displays an "Order
supplies" message when a supply
item is running low and a "Replace
supplies" message when a supply
item has reached its estimated end
of life. To ensure optimal print
quality, HP recommends replacing
a supply item when the "Replace
supplies" message is displayed.
The supply does not have to be
replaced at this point unless the
print quality is no longer
acceptable. Printing beyond this
point is possible using OVERRIDE
AT OUT 1 or OVERRIDE AT OUT
2. The Override options allow the
product to continue using a supply
item that has reached its estimated
end of life.
STOP AT LOW* Choose STOP AT LOW to stop
printing when a supply reaches a
low condition.
STOP AT OUT Choose STOP AT OUT to stop
printing when the estimated end of
life has been reached for a supply.
Printing beyond this point is
possible using OVERRIDE AT
OUT 1 or OVERRIDE AT OUT 2.
The supply does not need to be
replaced now unless the print
quality is no longer acceptable.
OVERRIDE AT OUT 1
OVERRIDE AT OUT 2
Choose OVERRIDE AT OUT 1 to
allow the product to continue
printing when supply items, other
than the toner collection unit, have
reached the end of their estimated
life. Using this option will
eventually result in unacceptable
print quality. Consider having a
replacement cartridge available for
when the print quality becomes
unacceptable.
ENWW Configure device menu 31