HP Insight Management-Software User Manual
Page 140
range. This can result in splitting an existing VCEM WWN exclusion range into two or more
ranges.
For example if VCEM WWN exclusion range for subrange 1 is defined as
50:01:43:80:02:A3:00:00 to 50:01:43:80:02:A3:03:FF, and if WWNs in use by server
profiles are 50:01:43:80:02:A3:00:02, 00-21-5A-9B-00-03, 00-21-5A-9B-00-06, and
00-21-5A-9B-00-07 then you must redefine the VCEM WWN subrange 1 as displayed in
:
Table 20 Redefining VCEM WWN subrange 1
End
Start
MAC Exclusion ranges
50:01:43:80:02:A3:00:01
50:01:43:80:02:A3:00:00
Subrange1-part1
50:01:43:80:02:A3:00:05
50:01:43:80:02:A3:00:04
ExclusionSubrange1-part2
50:01:43:80:02:A3:03:FF
50:01:43:80:02:A3:00:08
ExclusionSubrange1-part3
7.
In the target CMS, import VC Domain A into the VC Domain Group. If the VC Domain A
configuration is not identical on the source and target VCEM instances then create a new VC
Domain Group with imported VC Domain A.
For more information, go to:
, select the Product
Documentation Quick Link, then look in the White Papers section for the HP Matrix Operating
Environment Federated CMS Overview White Paper.
Consolidating multiple VCEM instances into a single VCEM instance
Use the following example scenario to transform multiple VCEM standalone instances (VCEM
subranges) into a single VCEM instance (big pool):
Consider that you have 3 central management systems (CMS), CMS#1 is using subrange #1,
CMS#2 is using subrange #2 and CMS#3 is using subrange #3, in a multi-CMS system or in the
Federated HP IO environment. You want CMS#2 to be the only CMS in a single VCEM instance.
1.
At CMS#1, remove the VC Domain A from the VCEM VC Domain Group.
2.
Power off CMS#1. This guarantees that no more than one VCEM instance is using that same
#01 subrange.
3.
At the CMS#2 target, browse to the MAC address management page and remove the MAC
exclusion range #01.
4.
At CMS#2, browse to the WWN management page and remove the exclusion range #01.
5.
At CMS#2, import VC Domain A into the VCEM VC Domain Group.
6.
At CMS#3, remove VC Domain C from VCEM VC Domain Group.
7.
Power off CMS#3. This guarantees that no more than one VCEM instance is using the same
#03 subrange.
8.
At the CMS#2 target, browse to the MAC address management page and remove the MAC
exclusion range #03.
9.
At CMS#2, browse to the WWN management page and remove exclusion range #03.
10. At CMS#2, import VC Domain C into the VCEM VC Domain Group.
11. At CMS#2, remove all other VCEM pre-defined subranges from the exclusion list. This returns
the available addresses into a single large pool.
For more information, go to:
, select the Product
Documentation Quick Link, then look in the White Papers section for the HP Matrix Operating
Environment Federated CMS Overview White Paper.
140 Managing MAC and WWN addresses