HP Insight Management-Software User Manual
Page 100
Figure 58 Selecting a Network window
To make the search easier, you can apply filters by Name, Shared Uplink Set, VLAN ID, label
or color. If you choose Name, Shared Uplink Set, VLAN or label, the second drop-down box
defaults to Contains and you can enter part of a filter such as Name or Shared Uplink Set. If
you choose Color, the drop-down box defaults to Is. Filters are helpful in situations where a
VC Domain Group has a large amount of VLAN networks (up to 1000) configured. Label and
color filters are only available in VC Domain Groups running VC firmware version 3.3x or
later.
NOTE:
You also have the option to change the network after you have assigned it. The
following figure displays changing the network.
Figure 59 Change network connection
NOTE:
For VC firmware versions 3.7x and later, you cannot select the same network for
more than one mapped physical port such as LOM1 and LOM2 for example. VCEM returns
an error similar to the following:
Ethernet connections 2, 4 are mapped to the same physical port (LOM:2). These connections are configured
with duplicate networks. Please ensure there are no duplicate networks on connections mapped to the same
physical port.
7.
Select Add iSCSI Connection in the Flex-10 iSCSI connections table to add network names,
port speed and boot settings.
NOTE:
The iSCSI boot configuration web GUI is not supported in IE10 compatibility mode.
Use IE10 without compatibility mode to make changes to the iSCSI boot configuration.
displays iSCSI boot settings.
100 Managing server profiles