HP StorageWorks XP Remote Web Console Software - Manual (Page 31)

Figure 8 Alternate path mode is Single mode with alternate paths in Standby only
.
Powering arrays on or off
This section describes procedures for powering local and external arrays on or off after XP External
Storage operations have started.
This section explains the following:
• Commands for Turning On or Off Only an External Array
• Powering local arrays on or off
• Poweringexternalarraysonoroff
• Turning On or Off Power Supply of Both local and external arrays
CAUTION:
To power both the local and external arrays off, first power off the local array, and then power off
the external array.
CAUTION:
To power both the local and external arrays on, first power on the external array, and then power
on the local array.
XP External Storage Software User Guide 31