Alternate paths for connecting sun storagetek v2x2, Connecting emc clariion cx series, Notes on connecting emc clariion cx series – HP StorageWorks XP Remote Web Console Software User Manual
Page 175: 175 connecting emc clariion cx series
are not in the following table, see the manuals of the Sun StorageTek FlexLine 380 and set the
parameters appropriately for the connecting configuration.
Table 27 System parameter settings for connecting Sun StorageTek FlexLine 380
Parameter setting
Parameter
Windows Non-clustered (DMP Support)
host type
System parameter settings for connecting Sun StorageTek 2540
When you connect a Sun StorageTek 2540 as an external array, set the system parameters of the
Sun StorageTek 2540 according to the following table. For the system parameters that are not in the
following table, see the manuals of the Sun StorageTek 2540 and set the parameters appropriately
for the connecting configuration.
Table 28 System parameter settings for connecting Sun StorageTek 2540
Parameter setting
Parameter
Windows 2K non Clustered DMP
host type
Alternate paths for connecting Sun StorageTek V2X2
If you connect a Sun StorageTek V2X2 as an external array, specify 0 for Alternate Path when you
map external volumes. Do not add any alternate paths after you finish mapping external volumes.
Connecting EMC CLARiiON CX Series
System parameter settings for connecting EMC CLARiiON CX Series
When you connect an EMC CLARiiON CX series as an external array, set the system parameters of
the EMC CLARiiON CX series according to the following table. For the system parameters that are
not in the following table, see the manuals of the EMC CLARiiON CX series and set the parameters
appropriately for the connecting configuration.
Table 29 System parameter settings for connecting EMC CLARiiON CX Series
Parameter setting
Parameter
CLARiiON Open
Initiator type
2
Failover mode
Notes on Connecting EMC CLARiiON CX Series
RAID-0 volumes on the EMC CLARiiON CX series are not supported.
System Parameter for Connecting EMC Symmetrix Series
When you connect an EMC Symmetrix series as an external storage system, set the system parameters
of the EMC Symmetrix series according to the following table. For the system parameters that are not
XP External Storage Software User Guide
175