HP Modular Cooling System - Manual (Page 9)

Web interface 9
• Identification menu
Overview menu
Click Overview in the left navigation frame to display the Overview screen. This screen displays graphic
meters for temperature and cooling system parameters.
Parameter Function
Server Intake Temperature Displays the average server intake temperature
Server Exhaust Temperature Displays the average server exhaust temperature
Cooling
Displays the heat removed by the water
Water Inlet Temperature Displays the temperature of the water coming into the
MCS unit to be used to cool the servers
Water Outlet Temperature Displays the temperature of the water after removing
the server heat
Water Flow Displays the water flow rate in liters or gallons per
minute
Water Valve Displays the percentage of the water valve opening
Water System Integrity Displays the Leak Detected Alarm, the Condensation
Pump Warning, and condensation pump activity
• Cycles—Displays the number of times the pump
runs
• Duration—Displays the total amount of time the
pump has run since it was last activated
Fan Speed Target Displays the fan speed level from 0 to 4.
• 0= fan turned off
• 4= fan at maximum speed
Cooling Module 1, 2, and 3 Displays the Server Intake and Server Exhaust
temperatures and fan speeds