HP Modular Cooling System - Manual (Page 30)

Web interface 30
Timers tab
This screen enables the Admin to change timer settings for the management module. Timers are used to
disable particular trap receivers on different days at different times of the week.
To change the timer settings:
1. Select to enable or disable the timer control from the Timer Control radio buttons.
2. Select a day of the week from the Day of Week dropdown box.
3. Enter a time interval in the Time Interval field.
4. Select a timer function from the Timer Function dropdown box.
5. Do one of the following:
o Click Save Settings to save the information.
o Click Cancel to undo the changes.