HP Surestore NAS - Manual (Page 21)

21
o You are then asked if you want to specify NIS.
o If yes, then you will enter the domain name
o Next you set the NIS server name or IP address
o Finally, you are asked to verify the domain name and NIS server name or IP address..
o When done, you will need to reboot your system.
o Upon rebooting, the system will be manageable from the NAS web interface where you
can setup and configure your solution's additional parameters.
Using the NAS Web Interface
The NAS server and storage array are managed via a web browser. Most administrative tasks
are accomplished via this interface.
To access the NAS web interface:
1. Use a computer on the network to open a web browser. On most Windows clients,
Internet Explorer 5.0 or later and Netscape 4.77 or later are supported. On most UNIX
clients, Netscape 4.77 or later is supported; Netscape 6.0 is not supported. For a detailed
list of supported browsers and operating systems, see www.hp.com/support/nasva
2. Type the IP address of the HP NAS VA in the address or location field. The Identity page
will appear similar to the figure below. If you have trouble connecting, try enabling the
browser's option to bypass the proxy server for local addresses.