HP XP20000XP24000 Disk Array - Manual (Page 62)

Figure 28 Identity Window
Description Item
See “Device Information” (page 62) . Device Information
See “LDEV Information” (page 63) . LDEV Information
Implements all the changes or settings. This button is active only in Modify mode. Apply button
Closes the window without making changes or settings. This button is available only in
Modify mode. Cancel button
Device Information
Device Information, in the upper part of the Identity window, has the following features:
Description Item
Serial number of the connected storage system. Serial Number
IP address of the connected storage system (SVP). IP Address
Device name of the connected storage system. The Remote Web Console user can change
the device name with Modify mode.
Enter a device name using up to 180 alphanumeric characters (ASCII codes), except for
some symbols, such as ", \, ;, :, ,, *, ?, <, >, |, /, ^, &, and %. You can also use a
space, except for before and after the device name. If you enter a space before or after
the device name, an error occurs when you click Apply. The device name is required to
use SNMP Agent. For detailed information on SNMP, see the HP StorageWorks
XP24000/XP20000 SNMP Agent Reference Guide.
Make sure to document the device name because the settings will be cleared when the
SVP is replaced.
Device Name
62 Using the Remote Web Console GUI