HP LaserJet 9000 Printer series - Manual (Page 126)

7 Problem solving 126
Understanding product messages
RAM DISK
IS WRITE PROTECTED
alternates with
Ready
The RAM disk is protected, and no new files can be written to it.
RESEND UPGRADE There is an error in the product firmware flash. Resend a valid firmware image.
ROM DISK DEVICE
FAILURE
alternates with
Ready
The ROM disk had a critical failure and can no longer be used.
Turn the product off, and then turn the product on to clear the message.
ROM DISK FILE
OPERATION FAILED
alternates with
Ready
The requested operation could not be performed. You might have attempted an illegal operation,
such as trying to download a file to a non-existent directory.
ROM DISK FILE SYSTEM
IS FULL
alternates with
Ready
Delete files and then try again, or turn the product off, and then turn the product on to delete all
files on the device. (Delete files using HP LaserJet Resource Manager or another software
utility. See the software help for more information.)
If the message persists, increase the size of the ROM disk. Change the ROM disk size from the
Configuration menu in the control panel (See
“System setup submenu” on page 205 ).
ROM DISK IS WRITE
PROTECTED The ROM disk is protected, and no new files can be written to it.
Message Explanation or recommended action