HP LaserJet 9000 Printer series - Manual (Page 18)

1 The basics 18
Helpful software for increased flexibility
Software for Windows
Use the system software to install the product. If you are installing the product on a network (Novell NetWare or Microsoft
Windows network) from a Windows 9X, Windows NT 4.0, Windows 2000, or Windows Me system, the system software guides
you through the installation process, and properly configures the network product.
Note If the product is used on a network, the network clients and servers must be properly configured to communicate on
the network.
For additional network product configuration and management, use HP Web JetAdmin. HP Web JetAdmin is a
browser-based management and should be installed only on the system administrator computer. For the latest list of
suppor ted host systems, visit HP Customer Care Online at
www.hp.com/go/webjetadmin .
To gain access to the Windows driver
To configure the driver, gain access to it in one of the following ways:
Note Settings in the driver and software application override control panel settings. (Software application settings override
driver settings.)
Operating system
Temporarily change settings
(from a software application) Change default settings
(across all software applications)
Windows 9X and
Windows Me From the File menu, click Print, and then
click Properties. (The actual steps can vary;
this is the most common method.) Click the Start button, point to Settings, and
then click Printers. Right-click the
appropriate printer icon, and choose
Properties.
Windows NT 4.0 and
Windows 2000 From the File menu, click Print, and then
click Properties. (The actual steps can vary;
this is the most common method.) Click the Start button, point to Settings, and
then click Printers. Right-click and choose
Document Defaults or Properties.