Changing an ip address – HP LaserJet 9000 Printer series User Manual
Page 246
F Administration tasks
246
Configuring and verifying an IP address
Changing an IP address
Use the following procedures if you have to change the product TCP/IP address for any reason.
HP Web JetAdmin
Open HP Web JetAdmin. Enter the TCP/IP address in the Quick Device Search, and click Go. At the top menu bar, follow this
procedure for discovery options.
1
Choose the drop-down menu and click Devices.
2
From the drop-down menu, click New Devices. Click Go.
3
Click the column header of your choice (such as IP Address or Device Model) to arrange the list of available devices in
ascending or descending order.
4
Highlight the product to configure, and click Open Device.
5
From the sub-menu at the top of the HP Web JetAdmin screen, click Configuration.
6
Click the network link located on the left side of the configuration screen.
7
Enter the new IP information. You might have to scroll down for more options.
8
Click Apply to save the settings.
9
Click the Refresh button located next to the question mark on the right side of the screen.
10
Verify the IP information by clicking Status Diagnostics or by printing a configuration page.