HP LaserJet 9000 Printer series - Manual (Page 216)

B Control panel menus 216
Configure device menu
Resets submenu
Note Use this menu with caution. You can lose buffered page data or product configuration settings when you select these
items. Reset the product only under the following circumstances:
z You want to restore the product default settings.
z Communication between the product and computer has been interrupted.
z You are having problems with a port.
The items in the Resets submenu will clear all memory in the product, while R ESET clears only the current job.
Item Explanation
RESTORE FACTORY
SETTINGS This item performs a simple reset and restores most of the factory (default) settings. This item
also clears the input buffer for the active I/O. E-mail gateways are not changed, and the local
address book is not cleared.
Resetting memory during a print job can result in data loss.
This item does not affect network settings stored on the HP Jetdirect print server (if installed).
CLEAR MAINTENANCE
MESSAGE This item appears only after the PERFORM PRINTER MAINTENANCE message displays.
OFF : The PERFORM PRINTER MAINTENANCE message will be cleared. If you do not replace the
printer maintenance kit, the PERFORM PRINTER MAINTENANCE message will be displayed again
after approximately 17,500 pages.
The message should not be turned off unless the necessary product maintenance has been
performed. If the required maintenance is not performed, product performance will degrade.
For more information, see “Product maintenance” on page 83 .