HP NonStop G-Series - Manual (Page 85)

Switch Command Interface (SWCI)
ServerNet Nomadic Disk User’s Guide—425485-001
6- 21
STATUS Commands
Displaying SCC Status Information
The STATUS SCC command displays status information about the SCC. The command
can return complete information or information about a specified attribute. Complete
information about the SCC includes:
•
Part number
•
Track ID
•
Date of manufacture
•
Firmware revision
•
Status of the most recent power-on self-test
scc-attr specifies one of these SCC attributes:
PARTNO
Displays the part number.
TRACKID
Displays the track identification number.
DATE
Displays date and time of manufacture.
FWREV
Displays the firmware revision.
PONTEST
Displays the status of the most recent power-on self-test (POST).
If scc-attr is not present, the STATUS SCC command displays all status
characteristics for the SCC.
STATUS SCC [ , scc-attr ]