HP NonStop G-Series - Manual (Page 49)

Switch Modules
ServerNet Nomadic Disk User’s Guide—425485-001
4 -5
SCC LEDs
SCC LEDs
The front panel of the SCC contains the following LEDs..
Caution. Do not attempt to replace the switch module, attempting to do so could damage the
equipment. For repair and replacement, contact professional services. The ServerNet
Nomadic Disk Subsystem Installation and Service Guide is available to professional services in
the TIM Hardware Service and Maintenance Collection.
LED Color Indicates Meaning Action
ENV Amber Environmental
fault Unlit: Voltage and
temperatures are normal. No action is required.
Lit: Sensor 1 or sensor 2
temperature is out of
range.
Flashing: voltages for
the SCC are out of
range.
Power off the switch
module immediately
and contact professional
services.
PON Green Power on Lit: SCC is receiving
power If the LED is lit, no
action is required.
Unlit: SCC is not
receiving power. Check the power-on
switch located in the
back of the switch
module and the power
cord connections.
TX, port A Amber Transmitting Flashing: port A is
transmitting. No action is required.
Unlit: port A is not
transmitting.
RX, port A Amber Receiving Flashing: port A is
receiving. No action is required.
Unlit: port A is not
receiving.
TX, port B Amber Transmitting Flashing: port B is
transmitting. No action is required.
Unlit: port B is not
transmitting.
RX, port B Amber Receiving Flashing: port B is
receiving. No action is required.
Unlit: port B is not
transmitting.