HP NonStop G-Series - Manual (Page 127)

Nomadic Disk Manager Interface
ServerNet Nomadic Disk User’s Guide—425485-001
7- 13
LISTOPENS Command
LISTOPENS Command
Use the LISTOPENS command to perform a FUP LISTOPENS command on each
volume in one or more segments.
SEGMENT { segname | * }
indicates which segments are affected by the LISTOPENS command. You can
specify the volumes in a specific segment (
segname ) or all volumes in all segments
(*).
If you do not include the SEGMENT parameter, the volumes in the current segment
are affected.
Examples
ND> LISTOPENS
ND> LISTOPENS, SEGMENT *
ND> LISTOPENS, SEGMENT ONE
LISTOPENS [ , SEGMENT { segname | * } ]