HP Media Center m477.uk Desktop PC - Manual (Page 23)

Setting Up My PC
17
Connecting the Remote Sensor
The remote sensor is a small device that connects to
the PC and allows the remote control to work with
the Media Center program.
For information on using the control cable in an
existing setup, see “Optional Connections” on
page 19.
1
If you have a cable TV set-top box, satellite, or
other set-top box that controls your TV signal,
connect the remote sensor control cable
(emitter) (A) into the back of the remote
sensor.
2
Remove the paper from the backing tape on
the end of the cable (B) and then press the
end of the cable over the remote IR receiver
window on your cable TV set-top box (C).
3
Plug the remote sensor cable into a USB
connector (D) on the back of the PC.
4
Place the remote sensor so that you can easily
point at it with the remote control. (An ideal
spot would be on top of the monitor or desk.)
P
B
A
C
D