HP StorageWorks XP Remote Web Console Software - Manual (Page 99)

Table 34 Cause of Error and the Result of RAID Manager Command (SSB)
Cause of Error RAID Manager Command SSB2 SSB1
Because of the shortage of
the pair tables, XP Snapshot
pair cannot be created. paircreate 9685 B901
B9A8
B9A9
Because of the shortage of
the differential tables, XP paircreate 9686
B9AD
B9AE
Snapshot pair cannot be
created.
Since the pool is not
available, XP Snapshot pair
cannot be created. paircreate 9700
When you create multiple XP
Snapshot pairs by specifying paircreate 9702
multiple S-VOLs for one
P-VOL, you specified the
pool ID that is different from
the pool ID used by the pairs
that are already created.
Therefore, an XP Snapshot
pair cannot be created.
Since the volume you
specified as the P-VOL is paircreate 9703
already used by another XP
Snapshot S-VOL, the pair
cannot be created.
Since the volume you
specified as the S-VOL is paircreate 9704
already used by another XP
Snapshot P-VOL, the pair
cannot be created.
Since the volume you
specified as the S-VOL is paircreate 9705
already used by another XP
Snapshot S-VOL, the pair
cannot be created.
Since the specified XP
Snapshot ID is already used paircreate 9706
by another XPp Snapshot
pair, the pair cannot be
created.
Since the capacity of the
pair exceeds the licensed paircreate 9707
capacity, the pair cannot be
created.
The command ended
abnormally because the All commands 9718
command other than the
paircreate command was
issued for the volume in the
pair other than the XP
Snapshot pair.
This error also may be
reported when the command
is executed by specifying an
unsupported parameter.
Troubleshooting When Using XP RAID Manager 99