HP StorageWorks XP Remote Web Console Software - Manual (Page 19)

Table 5 SSBs and Causes of Error Issued Upon Rejection of RAID Manager Commands (continued)
Cause of Error RAID Manager Command SSB
Because you specified a V-VOL as the
XP Snapshot P-VOL, the pair cannot be
created. paircreate 972f
Because you specified a pool-VOL as
the XP Snapshot P-VOL, the pair cannot
be created. paircreate 9730
When the XP Snapshot P-VOL and XP
Continuous Access P-VOL share the pairresync -restore 9731
volume, the status of the XP Continuous
Access pair is other than PSUS or PSUE.
Therefore, the XP Snapshot pair cannot
be restored.
When the XP Snapshot P-VOL and XP
Continuous Access Journal P-VOL share pairresync -restore 9732
the volume, the status of the XP
Continuous Access Journal pair is other
than PSUS or PSUE. Therefore, the XP
Snapshot pair cannot be restored.
Because the XP Snapshot P-VOL and XP
Continuous Access S-VOL share the pairresync -restore 9733
volume, the XP Snapshot pair cannot
be restored.
Because the XP Snapshot P-VOL and XP
Continuous Access Journal S-VOL share pairresync -restore 9734
the volume, the XP Snapshot pair
cannot be restored.
Because you specified an XP
Continuous Access Journal’s journal paircreate 9735
volume as the XP Snapshot P-VOL, the
XP Snapshot pair cannot be created.
Because the LUSE volumes you specified
for the P-VOL and S-VOL do not have paircreate, pairsplit, pairresync,
pairresync -restore 9736
the same structure, the command ends
abnormally.
Because you specified the volume with
the VMA setting as the XP Snapshot
P-VOL, the pair cannot be created. paircreate 973a
Because the LDEV number of the volume
you specified as the S-VOL is beyond All commands 973b
the specified range, the command ends
abnormally.
Because you specified the unmounted
volume as the XP Snapshot S-VOL, the
command ends abnormally. All commands 973c
Because you specified the blocked
volume as the XP Snapshot S-VOL, the
command ends abnormally. paircreate, pairsplit, pairresync,
pairresync -restore 973d
Because you specified the volume that
is in process of formatting as the XP paircreate, pairsplit, pairresync,
pairresync -restore 973e
Snapshot S-VOL, the command ends
abnormally.
Because you specified the volume
whose emulation type is other than paircreate, pairsplit, pairresync,
pairresync -restore 973f
Status of the XP Snapshot Pairs 19