HP StorageWorks XP Remote Web Console Software - Manual (Page 22)

Table 5 SSBs and Causes of Error Issued Upon Rejection of RAID Manager Commands (continued)
Cause of Error RAID Manager Command SSB
Because you specified the XP Auto LUN
reserved volume as the XP Snapshot
S-VOL, the command ends abnormally. All commands 975f
For information on using XP Auto LUN,
contact HP technical support (see
(page 110) ).
Unavailable parameter (unsupported
parameter) is specified in the command. paircreate 976a
Because the command was executed
with the PSUE option, the XP Snapshot
data cannot be stored. pairsplit 976c
When XP Snapshot P-VOL and XP
Continuous Access S-VOL share the pairresync 976e
volume, the status of the XP Continuous
Access pair is COPY. Therefore, the
snapshot data cannot be stored.
When the XP Snapshot P-VOL and XP
Continuous Access S-VOL share the pairsplit 976e
volume, the status of the XP Continuous
Access pair is COPY. Therefore, the
snapshot data cannot be stored.
When the XP Snapshot P-VOL and XP
Continuous Access Journal S-VOL share pairsplit 976f
the volume, the status of the XP
Continuous Access Journal pair is
COPY. Therefore, the snapshot data
cannot be stored.
Because you specified XP Continuous
Access Journal delta resync pair volume paircreate 9771
as the XP Snapshot P-VOL, the XP
Snapshot pair cannot be created.
Because you specified the XP
Continuous Access Journal delta resync paircreate 9772
pair volume as the XP Snapshot S-VOL,
the XP Snapshot pair cannot be
created.
When the XP Snapshot P-VOL and XP
Business Copy P-VOL share the volume, paircreate 9774
the MU number you specified for the
XP Snapshot pair is already used by
the XP Business Copy pair. Therefore,
the XP Snapshot pair cannot be
created.
When the XP Snapshot P-VOL and XP
Business Copy P-VOL share the volume, paircreate 9776
the XP Business Copy P-VOL you
specified for the XP Snapshot P-VOL has
consistency group settings. Therefore,
the XP Snapshot pair cannot be
created.
When the XP Snapshot P-VOL and XP
Business Copy S-VOL share the volume, paircreate 9777
you specified the MU number zero (0)
for the XP Snapshot P-VOL. Therefore,
22 About XP Snapshot Operations