HP StorageWorks XP Remote Web Console Software User Manual
Page 105
Table 34 Cause of Error and the Result of RAID Manager Command (SSB) (continued)
Cause of Error
RAID Manager Command
SSB2
SSB1
XP Snapshot S-VOL, the
command ends abnormally.
Since you specified the XP
Business Copy reserved
All commands
975c
volume as the XP Snapshot
S-VOL, the command ends
abnormally.
Since you specified the XP
Auto LUN source volume as
All commands
975d
the XP Snapshot S-VOL, the
command ends abnormally.
For information about using
XP Auto LUN, contact HP
technical support (see
).
Since you specified the XP
Auto LUN target volume as
All commands
975e
the XP Snapshot S-VOL, the
command ends abnormally.
For information about using
XP Auto LUN, contact HP
technical support (see
).
Since you specified the XP
Auto LUN reserved volume
All commands
975f
as the XP Snapshot S-VOL,
the command ends
abnormally.
For information about using
XP Auto LUN, contact HP
technical support (see
).
The XP Snapshot pair cannot
be created for any of the
following reasons:
paircreate
9763
•
The shared memory is not
increased.
•
Initialization is in
process.
Unavailable parameter
(unsupported parameter) is
specified in the command.
paircreate
976a
Since the command was
executed with the PSUE
pairsplit
976c
option, the snapshot data
cannot be stored.
When an XP Snapshot P-VOL
and XP Continuous Access
pairsplit
976e
S-VOL share the volume, the
status of the XP Continuous
Access pair is COPY.
Therefore, the snapshot data
cannot be stored.
When XP Snapshot P-VOL
and XP Continuous Access
pairsplit
976f
Troubleshooting When Using XP RAID Manager 105