HP StorageWorks XP Remote Web Console Software - Manual (Page 57)

Table 28 Pool Window Description (continued)
Description Item
XP24000/XP20000 External Storage Software User
Guide. For information about XP Thin Provisioning, see
the HP XP24000/XP20000 Thin Provisioning Software
User Guide.
•
Capacity: capacity of the volume
• Emulation: emulation type of the volume
•
RAID: RAID level (- - - will be displayed in case of an
external volume)
• Protection: Data protection level
SATA-W/V: Write and Verify method on SATA drives
Standard: FC drives, flash drives, external volumes, or
V-VOLs
HP recommends that the data protection level be the
same for pool-VOLs in the same pool.
• PG: parity group to which the volume belongs
•
Encryption: Status of volume encryption
Enable indicates the volume is encrypted.
Disable indicates the volume is not encrypted.
Hyphen (-) appears if the volume is other than internal
volumes.
•
Int. VOL Info: drive type of internal volumes. Nothing
will be displayed for FC drives. An asterisk ( * ) will be
displayed for a SATA drive. A dollar sign ( $ ) will be
displayed for an SSD drive. Three consecutive hyphens
(- - -) will be displayed for an external volume.
Pool-VOLs with different drive types cannot be
intermixed in the same pool.
•
Ext. VOL Info: drive type of external volumes. Nothing
will be displayed for FC drives. An asterisk ( * ) will be
displayed for a SATA or BD drive. A dollar sign ( $ )
will be displayed for an SSD drive. Three consecutive
hyphens (- - -) will be displayed for an internal volume.
As a best practice, you should specify the same drive
type for all pool-VOLs registered in the same pool.
• Cache Mode: if the volume is an external volume, cache
mode is displayed. This cache mode is specified when
the external volume is mapped. Pool-VOLs with different
cache modes cannot be intermixed in the same pool.
•
CLPR: number of the CLPR to which the volume belongs
•
Selected LDEVs: total number of the volumes that are
selected in the list
Information about the pool that you selected in the Pool
tree will be displayed. The following items are displayed
in the box. Pool Information box
• Pool ID: number that identifies the pool
•
Status: status of the pool
◦ Normal: pool is in the normal status
◦ Blocked: pool is blocked
•
Total Capacity: total capacity of the pool
•
Used Capacity: used capacity of the pool
Pool Window 57