HP StorageWorks XP Remote Web Console Software User Manual
Page 163
Table 38 Error Code and Error Contents When Operating RAID Manager (continued)
Error Content
Error Code
(SSB2)
Error Code
(SSB1)
A request for Pairsplit-S was received. However, the command was rejected because
the pair status was invalid.
C189
A request for Pairsplit-S was received. However, the command was rejected because
the corresponding volume was changing the status or the group included the pair
in process of status change.
C18A
The copy pair cannot be split because the S-VOL is in the process of status transition.
C194
A request for Pairsplit-r was received. However, the command was rejected because
the specified pair status was already PSUS or PSUE.
C195
Pair split cannot be executed because the group includes no pair that can be split.
C198
A request for Pairsplit-r was received. However, the command was rejected because
the corresponding volume was changing the status or the group included the pair
in process of status change.
C199
The status of XP Continuous Access pair or XP Continuous Access Asychronous pair
cannot be transited during the power-on processing for DKC.
C1BE
The command was rejected because the specified volume is used for P-VOL.
C211
The command was rejected because the specified volume is used for S-VOL.
C212
The command was rejected because RCU is not registered or the registered RCU
information is invalid.
C214
The command was rejected because an internal logical error has occurred.
C215
The command was rejected because the pair status is invalid.
C218
The command was rejected because the P-VOL status is not PSUS, PSUE, or PDUB.
C21A
The command was rejected because RCU is not registered or the registered RCU
information is invalid.
C21C
The command was rejected because the pair release is executed to the volume other
than P-VOL.
C22A
The command was rejected because the volume status is SMPL.
C22C
The command was rejected because the specified volume is the volume other than
P-VOL.
C22D
The command was rejected because the pairsplit command specifying -P option
(write protection of P-VOL) was issued to the volume that status is not PAIR.
C22E
The command was rejected because the S-VOL status is SMPL.
C233
The command was rejected because an internal logical error has occurred.
C234
C235
C236
C237
The command was rejected because the specified volume is the volume other than
P-VOL.
C238
The command was rejected because the pair resync was operated to the volume
which status is other than PSUS, PSUE, or PDUB.
C239
The command was rejected because an internal logical error has occurred.
C23A
The command was rejected because the volume status is SMPL.
C23B
The command was rejected because the volume status is other than PAIR or COPY.
C23C
Troubleshooting When Using RAID Manager
163