HP StorageWorks XP Remote Web Console Software User Manual
Page 167
Table 38 Error Code and Error Contents When Operating RAID Manager (continued)
Error Content
Error Code
(SSB2)
Error Code
(SSB1)
A request for Paircreate was received. However, the command was rejected because
of one of the following reasons:
•
The specified RCU’s SSID or CU number is not supported.
•
Though the specified RCU’s SSID or CU number is supported, the microcode for
the MCU device does not support them.
C3BA
These volumes cannot be specified as XP Continuous Access S-VOL:
•
XP Business Copy S-VOL other than PSUS status
•
Reserved volume for XP Business Copy
•
XP Business Copy P-VOL which is in process of reverse copy
C3BE
An XP Continuous Access S-VOL with the XP Business Copy S-VOL, a Reserved
volume (for example, Reserved volume for XP Business Copy), or a P-VOL which is
in process of reverse copy cannot be specified.
C3BF
A request for XP Continuous Access Paircreate was received. However, the command
was rejected because the specified volume was already formed as a pair by the
other XP Continuous Access or XP Continuous Access Journal (including journal
volumes).
C3C7
The S-VOL is reserved, or any one of RCU, S-VOL, or the path between MCU and
RCU is in the BUSY status.
C3CA
XP Continuous Access S-VOL is the volume for XP Business Copy pair.
C3CD
The DKC type of the RCU is not supported by XP Continuous Access Software.
C3D2
The SSID or CU number for the specified RCU is invalid.
C3D3
The specified S-VOL is unavailable because the connecting port cannot recognize
it.
C3D6
The status of the S-VOL in the RCU is invalid.
C3D7
Pair cannot be created if the XP Continuous Access S-VOL corresponds to any of
the following:
•
The volume is TP-VOL and the pair using the volume is created with XP Business
Copy volume, XP Snapshot volume, or the reserve volume of XP Auto LUN.
•
The volume is TP-VOL and the adding volume capacity or the releasing pages is
in progress.
•
The capacity of the volume is different from the capacity of the P-VOL.
•
The volume is initialized by XP Business Copy.
C3D9
The S-VOL status is not PSUS or PSUE.
C3DB
XP Continuous Access Asynchronous program products is not installed in RCU.
CB11
TrueCopy for Mainframe, XP Continuous Access, and XP Continuous Access Journal
cannot be mixed in the consistency group.
CB12
The consistency group for the RCU cannot be deleted because the reversing operation
between P-VOL and S-VOL by Takeover command failed.
CB19
The consistency group for the RCU was abnormally terminated because the reversing
operation between P-VOL and S-VOL by Takeover command failed.
CB1A
No dummy volume can be created in the S-VOL.
CB1D
The RCU does not support XP Continuous Access.
CB1F
In referring to the function bit, the system information reference was abnormally
terminated.
CB20
Troubleshooting When Using RAID Manager
167